Toner Cartridge Removal
Caution
Clean up any toner spills using a Type II Toner Vacuum only. Never use a damp
cloth to clean up spilled toner.
If you are removing a Toner Cartridge to facilitate removal of other components,
replace the Toner Cartridge as soon as those components have been removed.
Keeping the Toner Cartridges locked into place prevents contamination of the
toner system and spillage.
1.
Power down the printer.
2.
Using the lips on both sides, lift the Top Cover (Output Tray) off of the printer.
3.
Rotate the locking lever on the end of the cartridge (or cartridges) being removed
to the back unlocked (closed) position and lift the cartridge out of the printer.
Note
Some toner adheres to the bottom of the cartridge, so do not set the cartridge on
any surface that can be damaged by the toner.
Print Engine Disassembly
Print Engine dissasembly is presented in the following procedures organized in the
following catagories:
Covers
Trays
Feeders
Retard and Registration
Input and Output Chute Assemblies
Xerographics
Development
Drive
Electrical
8-6
Phaser 6300/6350 Color Laser Printer Service Manual