Xerox Phaser 6300 Service Manual page 488

Print Engine Plug/Jack Designators (Continued)
P/J Map Coordinates Remarks
61 3 H-143
120 3 G-137
132 1 H-109
133 1 D-108
134 1 F-106
135 1 E-109
136 2 D-122
137 3 B-137
138 3 B-136
139 3 E-133
140 3 E-133
141 3 E-135
142 2 E-122
144 2 H-121
151 2 H-120
154 3 F-142
160 2 I-128
161 2 I-126
162 2 I-128
163 2 I-126
164 2 I-127
165 2 I-127
166 2 I-126
167 2 I-126
171 4 G-154
181 3 E-138
190 3 F-138
191 3 G-143
192 3 F138
220 1 C-106
CN1 4 B-153
311 3 G-142
Wiring Diagrams
Connects the Engine Control Board and LV Harness.
Connects the Engine Control and Image Processor Boards.
Connects the Tray 1 Feed Solenoid and FRONT/DUP Harness.
Connects the Duplex Jam Sensor and FRONT/DUP Harness.
Connects the Full Stack Sensor and FRONT/DUP Harness.
Connects Tray 1 No Paper Sensor and FRONT/DUP Harness.
Connects the CTD (ADC) Sensor and FSR/ADC Harness.
Connects the Wire Assy Regi to the Registration Roller Assy.
Connects the Wire Assembly BTR to the Transfer Roller.
Connects the HVPS and Wire Assembly BTR.
Connects the HVPS and Wire Assembly Regi.
Connects the HVPS and HVPS Harness.
Connects the Toner Full Sensor and TNR FULL/FSR Harness.
Connects the EEPROM Board and EEPROM Harness.
Connects the Laser Unit and ROS Harness.
Not Connected
Connects the LVPS and AC Inlet.
Connects the LVPS and Interlock Switch.
Connects the LVPS and FSR/ADC Harness.
Connects the LVPS and 24 V Harness.
Connects the LVPS and LV PRG Harness.
Connects the LVPS and LV Harness.
Connects the LVPS and Rear Fan.
Not Connected
Connects the Option Feeder and OPFPLG Harness.
Connects the Registration Sensor and REGI SNS Harness.
Connects the Tray 1 (MPT) Turn Clutch and FRONTCLH.
Connects the Engine Control Board and EEPROM Harness.
Connects the Registration Clutch and FRONTCLH Harness.
Connects the Control Panel and Control Panel Harness.
Connects the Temperature/Humidity Sensor and TMP Harness.
Connects the Engine Control Board and LV RPG Harness.
10-3