Engine Test Print - Xerox Phaser 6300 Service Manual

Engine Test Print

Isolate printer hardware problems to either the Engine Control or Image Processor
Board by running the Engine Test print. If the print is successfully printed, focus on
the Image Processor Board or its components (RAM, Hard Drive, Configuration
Card, etc.). If the print fails, refer to Section 4 for print engine troubleshooting help.
1.
Press the Test Print button located on the Rear Panel.
2. The printer prints the 600 x 600 test print unless an error status from the Engine
Control Board is present.
Print-Quality Troubleshooting
Test Print Button
s6300-364
5-9