Post Soft Fault Messages - Xerox Phaser 6300 Service Manual

POST Soft Fault Messages

When POST detects a soft error, the printer continues the startup process. Before the
printer reaches its "Ready" state, the Startup page is printed with soft errors appearing
in a red box. The box contains all soft faults encountered, with the upper left corner of
the box in the center of the Startup page, and extending to the right margin, similar to
the one shown here.
These messages are substituted for <device>:
Ethernet
USB
Real-Time Clock
RAM Memory Slot 1 Checksum
RAM Memory Slot 2 Checksum
RAM Memory Slot 1 Rejected
RAM Memory Slot 2 Rejected
Max RAM Limit
IDE Disk
For Ethernet, USB, and Real-Time Clock errors, replace the Image Processor Board.
For IDE Disk errors, replace the Hard Drive. For memory errors, see "RAM Memory
Fault Isolation" on page 4-16.
4-4 Phaser 6300/6350 Color Laser Printer Service Manual
Hardware Failure:
<device>:
General Failure