Toner Cartridge Holder Assembly
The Toner Cartridge Holder is responsible for transporting toner from the four Toner
Cartridges to the Developer Assemblies. The following figure shows the location of
each major component.
Note
When servicing components of the Toner Cartridge Holders, CRUM Reader, and
cartridge sensors, avoid disconnecting the Auger Tubes from the Developer
Frame Assembly. All repairs, excluding replacement of the holder itself and
removal of the Developer Frame Assembly, are possible with the Auger Tubes
attached. Once the covers are removed, re-install the Toner Cartridges to help
avoid toner spills.
Toner Cartridge In Sensor
CRUM Reader
Theory of Operation
Toner Cartridges
No Toner Sensors
Toner Motors
s6300-063
2-45