Multi-Purpose Tray Pcb - Canon CLBR 460ps Service Manual

5) Place the ITB unit drawer unit upside
down.
6) Unhook the 2 claws and remove the
connector cover.
7) Disconnect the connector of the ITB
unit life sensor.
8) Unhook the claw and then slide the
cable guide in the direction of the arrow
to remove.
Claws Connector cover
Connector Cable guide
Figure 3-8-11
9) Disconnect the connector and remove
the 2 screws and then the registration
roller frame unit.
Connectors
Screws
Registration roller Frame unit
Figure 3-8-12
10) Disconnect the 3 connectors, unhook
the 2 claws, and remove the cable band
and then the multi-purpose tray PCB.
Connectors
Screws
Cable band

Multi-purpose tray PCB

Figure 3-8-13
CHAPTER 3
3 - 63