Table of Contents
Advertisement
Submenu
GATEWAY ADDRESS
ENABLE APPLETALK
APPLETALK ZONE
ENABLE NOVELL
NOVELL FRAME
TYPES:
ETHERNET 802.2
ETHERNET 802.3
ETHERNET II
ETHERNET SNAP
TOKENRING 802.2
TOKENRING SNAP
Options
[127.000.000.001]
YES/NO [NO]
YES/NO [NO]
YES/NO [NO]
YES/NO [NO]
YES/NO [NO]
YES/NO [NO]
YES/NO [NO]
YES/NO [NO]
Remarks
In some cases, the values may differ
from the above.
If your TCP/IP network has a gateway,
and users outside the gateway plan to
print to the printer using TCP/IP, enter
the gateway address here.
Select "YES" if you have an AppleTalk
network connected to the printer.
You can enable AppleTalk, TCP/IP, and
IPX (Novell) communication simultane-
ously.
Use the up and down keys to select the
AppleTalk zone in which you want the
printer to appear.
Displayed when "ENABLE APPLETALK"
is set to "YES".
Select "YES" if you have an IPX (Novell)
network connected to the printer.
You can enable AppleTalk, TCP/IP, and
IPX (Novell) communication simultane-
ously.
Select the Ethernet frame type used for
communication between the NetWare
file server and the printer.
If both Ethernet port and TokenRing
port are enabled, Ethernet frame types
screen appears first. If the Ethernet
port is not enabled, but TokenRing port
is enabled, TokenRing frame types
screen appears.
Specifies whether or not Ethernet 802.2
should be enabled.
Specifies whether or not Ethernet 802.3
should be enabled.
Specifies whether or not Ethernet II
should be enabled.
Specifies whether or not Ethernet SNAP
should be enabled.
Specifies whether or not TokenRing
802.2 should be enabled.
Specifies whether or not TokenRing
SNAP should be enabled.
CHAPTER 1
1 - 39
Advertisement
Chapters
Table of Contents
Troubleshooting
