Canon CLBR 460ps Service Manual page 51

Submenu
NDS tree name
Current path
Object list
SELECTED PRINT
SERVER NAME
ENTER PASSWORD
PRINT Q SEARCH
BROWSE TO PRINT Q
SUBTREE ROOT
NDS tree name
Current path
Object list
PRINT Q ROOT
ENABLE BINDERY
Options
ENTIRE NDS TREE/
SUBTREE
YES/NO [NO]
Remarks
Selects a NDS object.
The NDS tree name appears in the top
line of the message area. The first
item in the scrollable object list
appears in the second line.
Selects a NDS object.
The current path of the previously
selected object appears in the top line
of the message area. The first item in
the scrollable object list appears in the
second line.
Press up and down arrow keys to
scroll through the available print serv-
er list, and select a server.
"ENTER PASSWORD" appears if the
print server login requires a password.
"PRINT Q SEARCH" appears if it does-
n't require a password.
Press up and down arrow keys to
enter password.
Select "ENTIRE NDS TREE" to display
"ENABLE BINDERY". Select "SUB-
TREE" to display "BROWSE TO PRINT
Q SUBTREE ROOT".
Press Enter key to display "NDS TREE
NAME".
NDS tree name appears in the top line
of the message area. The first item in
the scrollable object list appears in the
second line.
Use the up and down keys to select a
NDS object and then press the Enter
key to display "CURRENT PATH".
The ".." option places you one level
higher on the tree; the "." option
selects the same level on the tree.
The current path of the previously
selected object appears in the first line
of the message area. The first item in
the scrollable object list appears in the
second line.
Select a NDS object to display "PRINT
Q ROOT".
Select an object to display "ENABLE
BINDERY".
Use this submenu to enable bindery
emulation mode.
Press the Enter key (with YES select-
ed) to display "BINDERY SETTINGS"
(if earlier "BINDERY SETTINGS" exist);
CHAPTER 1
1 - 41