Canon CLBR 460ps Service Manual page 241

6. Deflector drive solenoid
1) Open the reversing unit.
2) Remove the right reversing cover.
3) Disconnect the connector (J3108, 2
pins) from the duplexing unit driver
PCB.
4) Remove the screw from the deflector
drive solenoid.
5) Shift the reversing unit lock arm in the
direction of the arrow and then remove
the deflector drive solenoid.
Screw
Reversing unit lock arm
Deflector drive solenoid
Figure 3-9-14
CHAPTER 3
3 - 71