Canon CLBR 460ps Service Manual page 177

3) Unhook the 2 claws at the bottom of the
drum cartridge drawer,
remove the upper front cover unit.
Claws Upper front cover
Figure 3-2-10
Note: When putting the upper front cover
back to the drum cartridge drawer,
confirm that the pin of the grip cam
is inserted to the groove of the
drawer lock lever properly.
Drum cartride drawer unit
Drawer lock lever
Figure 3-2-11
and then
Grip cam
Pin
Upper front cover unit
7. Lower front cover unit
1) Open the ITB unit drawer.
2) Unhook the 2 Claws and remove the 2
screw covers.
Claws Screw covers
Figure 3-2-12
3) Remove the 2 screws and pull the lower
front cover unit toward you to remove
the boss.
Screws Lower front cover
Figure 3-2-13
4) Move the lower front cover unit down-
ward to remove.
CHAPTER 3
3 - 7