Table of Contents
Advertisement
Canon
7.27 Plockmatic Multi-Purpose Stacker
Item
Required Equipment
Maximum Stack Height
Maximum Stack Weight
Supported Paper Size
Supported Paper
Weight
67
Supported Paper Types
Maximum Curl Level
Paper Size Change
Side Registration
Adjustment
Power source
Dimensions (H x W x D)
Weight
Temperature Range
Humidity Range
67 Media less than 39 lb bond (148 g/m
and line speed.
68 Stacking of thinner paper with curl will cause more frequent jams and poorer stack quality.
Revision 4
• High Capacity Stacker-J1
• HCS Long Sheet Tray-A1
• DFD Interface Kit-A1
• DFD PATH-B1 (H=860)
For sheets less than 25.6" (600 mm), maximum stack height is approximately
11.8" (300 mm)
For sheets longer than 25.6" (600 mm), maximum stack height is
approximately 5.3" (135 mm)
Approximately 88.2 lb (40 kg)
8.5" x 11" (long edge), 9" x 12" (long edge), 11" x 17", 12" x 18", Custom Size
(8.27" x 11" (210 mm x 280 mm) to 13" x 30"(330 mm x 762 mm) )
39 lb bond to 150 lb cover (148 g/m
Plain, Coated, Recycled, and Pre-punched
68
0.2" (5 mm) flat curl, measured on a flat surface
Manual change of paper size
Mechanical side guides, operator adjusted
100-240 V, 50-60 Hz, 2A
Approximately 41.8" x 35.4" x 26.8"
(1,060 mm x 900 mm x 680 mm)
Width expandable to approximately 55" (1,410 mm)
Lift Unit:
Approximately 157 lb (71 kg)
Docking Unit:
Approximately 11 lb (5 kg)
59 degrees F to 86 degrees F (15 degrees C to 30 degrees C)
30% - 80% relative humidity
2
) may be stackable but is highly sensitive to curl, environmental conditions,
imagePRESS V1000 Customer Expectations Document
imagePRESS V1000 Customer Expectations Document
Specification
2
to 400 g/m
2
)
Page 91
Advertisement
Table of Contents
