External Covers - Canon CLBR 460ps Service Manual

B. External Covers
1. Top cover unit
1) Remove the control panel according to
the control panel removal procedures
on Page 3-9.
2) Open the rear cover.
3) Remove the 2 screws.
Screws
Figure 3-2-2
4) Open the top cover and drum cartridge
drawer.
5) Unhook the 6 claws.
cover unit in the direction of the arrow
to unhook the 2 hooks and then remove
the unit.
Claws Hooks
Upper cover unit
Figure 3-2-3
Lift up the top
2. Left cover unit
1) Remove the top cover unit.
2) Remove the cassette.
3) Open the ITB unit drawer.
4) Remove the 2 screws and unhook the
claw.
5) Lift up the left cover in the direction of
the arrow and unhook the 2 hooks to
remove the cover.
Screws Claw
Hooks Left cover unit
Figure 3-2-4
3. Right cover
1) Remove the top cover unit.
2) Remove the 2 screws.
3) Lift up the right cover in the direction of
the arrow and unhook the 3 hooks to
remove the cover.
Screws Right cover unit
Hooks
Figure 3-2-5
CHAPTER 3
3 - 5