R. Developing Rotary Home Position
Sensor
1) Remove the top cover unit.
2) Remove the left cover unit.
3) Remove the 2 screws and then the sen-
sor fixing plate.
Screws
Sensor fixing plate
Figure 3-5-15
4) Unhook the 2 claws and disconnect the
connector from the sensor fixing plate,
and then remove the developing rotary
home position sensor.
S. Toner Cartridge Contact Sensor
1) Remove the rotary drive unit according
to the rotary drive unit removal proce-
dure on page 3-14.
2) Unhook the 2 claws from the rotary
drive unit and then remove the toner
cartridge contact sensor.
Claws
Toner cartridge contact sensor
Rotary drive unit
Figure 3-5-16
CHAPTER 3
3 - 43