Table of Contents
Advertisement
CHAPTER 1
Submenu
BINDERY SETTINGS
CONNECTED SERVERS
REMOVE FSERVER
AVAILABLE SERVERS
FILE SERV. LOGIN
ENTER LOGIN NAME
FSERVER PASSWORD
PRINT SERVER
PSERVER PASSWORD
ANOTHER FS?
1 - 42
Options
VIEW/CHANGE/SKIP/
REMOVE FSERVER
[VIEW]
SUPERVISOR/
ADMINISTRATOR/
ENTER LOGIN NAME
YES/NO [NO]
Remarks
(with NO selected) to display "POLL
INT. (SEC)" if NDS and/or BINDERY
are enabled. If neither is enabled,
"ENABLE SNMP" is displayed.
Select "VIEW" to display a list of
servers connected to the network.
Select "CHANGE" to display a list of
all available servers. Select
"REMOVE" to display a list of connect-
ed servers that you can disconnect.
Select "SKIP" to advance to the "POLL
INT. (SEC)" screen.
Select a server you want to use from
the connected servers.
After selecting a server, press the
Enter key to display "POLL INT.
(SEC)".
Select a server you want to disconnect
from the connected servers.
Select a server you want to connect
from a list of all available servers.
If a password is required to login to
the server, the "FILE SERVER LOGIN"
screen is displayed.
If you select a preset login name,
"FSERVER" is displayed. If you select
"ENTER LOGIN NAME", "ENTER
LOGIN NAME" is displayed.
Use the up and down arrow keys to
enter a login name.
Display "FSERVER PASSWORD" to
enter password.
Use the up and down keys to enter
the password.
Select a print server you want to con-
nect.
If the selected print server requires a
password, "PSERVER PASSWORD" is
displayed. If it does not require a
password, "ANOTHER FS?" is dis-
played.
If fewer than 8 file servers are con-
nected, ANOTHER FS? is displayed. If
the maximum number of file servers
are connected, "POLL INT. (SEC)" is
displayed.
Select "YES" to redisplay "AVAILABLE
SERVERS". Select "NO" to display
"POLL INT. (SEC)".
Advertisement
Chapters
Table of Contents
Troubleshooting
