Canon CLBR 460ps Service Manual page 251

5. Paper feeder pick-up solenoid
1) Remove the paper feeder pick-up drive
unit, according to the paper feeder pick-
up drive unit removal procedure on
page 3-79.
2) Remove the screw and then the paper
feeder pick-up solenoid from the paper
feeder pick-up unit.
6. Paper feeder paper sensor
1) Remove the PCB cover according to the
paper feeder PCB removal procedure 1)
through 2) on page 3-81.
2) Unhook the 2 claws, disconnect the
connector, and then remove the paper
feeder paper sensor.
7. Paper feeder paper size detection
switch
1) Remove the paper feeder PCB according
to the paper feeder PCB removal proce-
dure on page 3-81.
8. Paper feeder PCB
1) Remove the upper frame unit according
to the paper feeder pick-up drive unit
removal procedure 1) on page 3-79.
2) Unhook the 2 claws and then remove
the PCB cover.
Claws PCB cover
Figure 3-10-8
3) Disconnect the 3 connectors, remove
the screw, unhook the claw, and then
remove the paper feeder PCB.
Connectors Screw
Claw Paper feeder PCB
Figure 3-10-9
CHAPTER 3
3 - 81