5) Unhook the claw of the heater holder,
remove the heater holder, and then pull
out the upper fixing heater gently.
Heater holder
Claw
Upper fixing heater
Figure 3-4-17
L. Lower Fixing Heater
1) Remove the fixing cover 1.
2) Remove the screw and then the lead
wire.
Screw
Lead wire
Figure 3-4-18
3) Remove the heater contact in the con-
nector with the contact removal tool
(RY9-0099).
4) Remove the 2 screws, disconnect the
connector (J84, No.4 pin), and then
remove the lead wire.
Connector
Heater contact
Screws
Figure 3-4-19
CHAPTER 3
3 - 27