Canon CLBR 460ps Service Manual page 289

8) Foreign matters or dirt on the paper guide, secondary transfer roller, feed roller, registration
roller
Action: Check the paper path. If foreign matters or dirt is on the parts mentioned above,
clean the dirty areas.
9) Foreign matters, burr, or dirt on paper path
Action: Check the paper path, and clean the parts if dirty or foreign matters are attached.
If the feed guide is scarred or deformed, replace it.
[ 4-3 ] Skew
<Possible causes>
1) Paper particle or dust on feed roller, registration roller, and separation guide
Action: Clean the dirty area.
2) Registration roller spring is deformed or out of position.
Action: Re-set the spring to the correct position. If it is deformed, replace it.
CHAPTER 4
4 - 35