Lower Thermistor; Upper Fixing Heater - Canon CLBR 460ps Service Manual

CHAPTER 3
J. Lower Thermistor
1) Remove the fixing unit entrance guide
according to the lower thermoswitch
removal procedure 1) and 2) on page 3-
25.
2) Remove the screw from the lower ther-
mistor.
Claw

Lower thermistor

Figure 3-4-14
3) Remove the connector (J85) and then
the lower thermistor.
3 - 26
K. Upper Fixing Heater
1) Remove the fixing cover 1.
2) Remove the screw and then the lead
wire.
Screw Lead wire
Figure 3-4-15
3) Remove the heater contact in the con-
nector with the contact removal tool
(RY9-0099).
4) Remove the 2 screws, disconnect the
connector (J84, No.3 pin), and then
remove the lead wire.
Connector Heater contact
Screws
Figure 3-4-16