IV. MAIN PARTS
A. Cassette Pick-up Roller
1) Remove the cassette.
2) Remove the shaft from the bushing, and
then remove the cassette pick-up roller
unit.
3) Unhook the claw and then remove the
cassette pick-up roller from the holder.
1
2
Holder
Cassette Pick-up roller
Claw
Figure 3-4-1
< Note for reassembly >
When installing the pick-up roller unit,
ensure that the shaft of the pick-up roller
unit is inserted to the joint firmly.
3
B. Cassette Feed Roller
1) Remove the cassette.
2) Holding the knob, pull out the cassette
feed roller.
Cassette feed roller
Knob
Figure 3-4-2
C. Cassette Separation Roller
1) Remove the cassette.
2) Open the cover. Holding the knob, pull
out the cassette separation roller.
Cover
Cassette separation roller
Figure 3-4-3
< Note for reassembly >
Make sure to close the cover firmly after
installing the separation roller.
CHAPTER 3
3 - 21