Canon CLBR 460ps Service Manual page 229

B. DC Controller PCB
1) Remove the top cover unit and the left
cover unit.
2) Remove the 13 screws and the shield
plate.
Screws Shield plate
Figure 3-8-2
3) Unhook the 2 claws and remove the
cable guide.
Claws Cable clip
Cable guide
Figure 3-8-3
4) Remove the 4 screws, disconnect the 20
connectors, and then remove the DC
controller PCB.
Screws Connectors
DC controller PCB
Figure 3-8-4
CHAPTER 3
3 - 59