Lower Fixing Roller - Canon CLBR 460ps Service Manual

CHAPTER 3
N. Lower Fixing Roller
1) Remove the upper fixing roller accord-
ing to the upper fixing roller removal
procedure on page 3-28.
2) Remove the 2 E-rings, 4 screws, and
then the fixing unit drive gear side
plate.
3) Remove the fixing unit drive gears.
E-rings
Screws
Drive gear side plate
Fixing unit drive gears
Figure 3-4-26
4) Remove the grounding-ring on the right
side of the lower fixing roller, C-ring,
heat-insulating bushing, and bearing.
Grounding-ring
C-ring
Heat-insulating bushing
Bearing

Lower fixing roller

Figure 3-4-27
3 - 30
5) Remove the C-ring on the left side of the
lower fixing roller,
bushing, bearing, and then the lower
fixing roller.
C-ring
Heat-insulating bushing
Bearing
Lower fixing roller
Figure 3-4-28
heat-insulating