Table of Contents
Advertisement
CHAPTER 1
14. SERVICE menu
The SERVICE menu is a hidden menu exclusively for the field support staff. It is displayed after
the LANGUAGE SETUP menu when the power is turned ON with the MENU and ROTATE keys
held down.
The SERVICE menu allows you to adjust color density of the printer.
The sub-menus in the SERVICE menu are listed below. (Default values are in the square
brackets.)
Submenu
ADJUST DENSITY?
ADJUST DENSITY
CYAN
ADJUST DENSITY
MAGENTA
ADJUST DENSITY
YELLOW
ADJUST DENSITY
BLACK
PRINT SERVICE PAGE
NOTE: The values, which are set while the printer is operating, do not become effective.
Therefore, sets the values when the printer is not operating.
1 - 44
Options
YES/NO [NO]
-7/-6/-5/-4/-3/-2/-1/0/
/1/2/3/4/5/6/7 [0]
-7/-6/-5/-4/-3/-2/-1/0/
/1/2/3/4/5/6/7 [0]
-7/-6/-5/-4/-3/-2/-1/0/
/1/2/3/4/5/6/7 [0]
-7/-6/-5/-4/-3/-2/-1/0/
/1/2/3/4/5/6/7 [0]
YES/NO [NO]
Remarks
Specifies whether or not the toner den-
sity should be adjusted.
Sets density of cyan.
Sets density of magenta.
Sets density of yellow.
Sets density of black.
Prints a TEST PAGE with the changed
settings.
Advertisement
Chapters
Table of Contents
Troubleshooting
