CHAPTER 3
B. Multi-purpose Tray Pick-up Solenoid
1) Remove the multi-purpose pick-up unit
according to the multi-purpose pick-up
unit removal procedure on page 3-14.
2) Remove the screw and then the multi-
purpose tray pick-up solenoid from the
multi-purpose pick-up unit.
3 - 48
C. Cassette Pick-up Solenoid
1) Remove the cassette.
2) Remove the top cover unit and the left
cover unit.
3) Disconnect the connector (J106, 3 pins)
from the feed PCB.
4) Remove the cable from the cable clips.
5) Remove the screw and then the cassette
pick-up solenoid unit.
Cable
Cable clips
Screw
Cassette pick-up solenoid unit
Figure 3-6-2
6) Remove the screw and then the cassette
pick-up solenoid from the cassette pick-
up solenoid unit.