Multi-Purpose Pick-Up Unit - Canon CLBR 460ps Service Manual

6) Place the ITB unit drawer unit upside
down.
7) Remove the 2 springs and then the
cross bar.
8) Unhook the 2 claws, and then remove
the connector cover to disconnect the
connector.
Springs Cross bar
Claws Connector cover
Connector
Figure 3-3-13
9) Remove the 2 screws.
Screws
Figure 3-3-14
10) Unhook the 2 claws and remove the
gear.
11) Unhook the 2 claws and remove the
clutch gear.
12) Disconnect the connector, and remove
the 2 Screws and then the multi-pur-
pose pick-up unit.
Claws
Gear
Clutch gear
Connector
Screws

Multi-purpose pick-up unit

Figure 3-3-15
CHAPTER 3
3 - 15