Removing And Reinstalling The Outside Panel Assembly - Sony HDW-750 Maintenance Manual

1-4. Removing and Reinstalling the
Outside Panel Assembly
Removal
n
Be sure to set the POWER switch to OFF, unplug the
power cord or remove the battery before starting any of the
following procedure to protect inside of the unit from
damage.
1. Loosen the screw (with drop-safe) in the left of the
front lid assembly.
2. Loosen the four screws (with drop-safe) and remove
the outside panel assembly.
Outside panel
assembly
HDW-750/750CE V1
Reinstallation
1. While inserting the hook of the outside panel assembly
2. Reinstall it by reversing the steps of disassembling.
Front lid assembly
Screws
(with drop-safe)
Screws
(with drop-safe)

1-4. Removing and Reinstalling the Outside Panel Assembly

into the guide shaft of the cassette compartment
assembly, install the outside panel assembly.
n
Standard tightening torque :
Screw (with drop-safe, B3 x 12)
80 x 10
Hook of outside panel assembly
Guide shaft of
cassette compartment
assembly (RP)
_2
N.m (8 kgf.cm)
Screws
(with drop-safe)
Screws (with drop-safe)
1-11