Sony HDW-750 Maintenance Manual page 346

7-22. T-Tension Regulator Assembly Replacement
Removal
1. Removing the T-tension regulator
band assembly
(1) Remove the extension spring from the T-
tension regulator arm.
(2) Remove the stop washer and remove the T-
tension regulator band assembly passing
underneath the T-tension regulator arm.
2. Removing the T-tension regulator
assembly
(1) Remove the stop washer and remove the T-
tension regulator assembly.
m
. The release plate comes off at the same
time. Be careful not to lose it.
. Depending on the time of production at the
factory, there are sets that have no release
plate.
7-76
Stop washer
Release plate
T-tension
regulator assembly
T-tension regulator
band assembly
Stop washer
T-tension
regulator arm
Extension spring
HDW-750/750CE V1