Sony HDW-750 Maintenance Manual page 134

4-4. OPERATION Menu
MARKER 1 Display (Setting the MARKER)
? 07 O MARKER 1
MARKER
CENTER
CENTER MARK
SAFETY ZONE
SAFETY AREA
ASPECT
ASPECT SELECT
ASPECT MASK
ASPECT MASK LVL :
100% MARKER
Item Setting
MARKER OFF/ON
CENTER OFF/ON
CENTER MARK 1/2/3/4
SAFETY ZONE OFF/ON
SAFETY AREA 80/90/92.5/95
ASPECT OFF/ON
ASPECT SELECT 14 : 9/13 : 9/4 : 3/VISTA/CNSCO
ASPECT MASK OFF/ON
ASPECT MASK LVL 0 to 8
100% MARKER OFF/ON/SD
*1 : The CENTER MARKER is displayed as shown below.
Setting
1
VF
screen
n
When an NTSC system VF or monitor is connected, the MARKER and ZEBRA displays are not output
when "DOWN CON MODE" of the OUTPUT SEL display is CROP.
4-12
: OFF
: OFF
: 3
: OFF
: 90%
: OFF
: 4:3
: OFF
0
: OFF
2
Function
Turns ON/OFF all the MARKER display function.
Turns ON/OFF the CENTER MARKER display.
Selects the types of CENTER MARKER when the
above CENTER MARKER display is ON.
Turns ON/OFF the SAFETY ZONE MARKER
display.
Selects the ranges of the SAFETY ZONE
MARKER display.
Turns ON/OFF the ASPECT MARKER display.
Selects the aspect ratio.
VISTA : 1.85 : 1
CNSCO : 2.35 : 1
Turns ON/OFF the function to darken the outside
of the specified aspect.
n
This setting is effective in the VF output only.
Selects the darkness level of the outside of the
specified aspect when ASPECT MASK is ON.
n
This setting is effective in the VF output only.
Turns ON/OFF the 100% (effective picture
elements) MARKER display.
(The screen size is smaller in the SD mode
because edges are outside the marker.)
3 4
*1
HDW-750/750CE V1