Applying Oil To Reel Drive Gear Assembly - Sony HDW-750 Maintenance Manual

2-2-3. Applying Oil to Reel Drive Gear Assembly

Inspection timing
Refer to Section 2-2-2. Periodic Inspection List.
Tools
Oil : 7-661-018-18
Preparation
1. Check that the unit is in the unthreading end state.
2. Turn off the main power.
3. Remove the front lid and outside panel. (Refer to Section 1-4.)
4. Remove the cassette compartment. (Refer to Section 1-9.)
Applying oil
1. Rotate the S/T one-way gear in the direction of the arrow until the square holes showing the letter S
or T become visible.
2. Apply a drop of oil to the square holes respectively.
n
Be sure to wipe off the oil that oozes to the surface of the S/T one-way gear, with gauze or cloth.
n
Refer to Section 7-1-5 for using oil.
Reel drive gear assembly
HDW-750/750CE V1
Square hole
Square hole
S-one-way gear
Square hole
T-one-way gear
Square hole
2-2. Periodic Inspection
2-11