Outside Panel Section (Triax); Outside Panel Assembly (Triax) - Sony Power HAD FX HSC300R Service Manual

2-2.

Outside Panel Section (TRIAX)

2-2-1.

Outside Panel Assembly (TRIAX)

Procedure
1. Loosen the five screws with stopper and open the outside panel assembly in the arrow direction.
Screws with stopper
Outside panel assembly
2. Disconnect the two flexible flat cables from the two connectors (CN202, CN203) on the CD-78 board.
3. Open the clamp.
4. Disconnect the harness from the connector (CN3) on the TX-148 board.
5. Disconnect the harness from the connector (CN3) on the FL-377 board.
6. Remove the two outside panel supports from the portions A and remove the outside panel assembly.
Clamp
Harness
CN3
(FL-377 board)
Harness
CN3
(TX-148 board)
7. Install the removed parts by reversing the steps of removal.
HSC300RF/HSC100RF/HSC300R/HSC100R
Screws with stopper
Outside panel assembly
Outside panel
support
CN203
Portion A
(CD-78 board)
Portion A
Outside panel support
Flexible flat cables
CN202
(CD-78 board)
2-2