Sony HDW-750 Maintenance Manual page 302

7-4. Replacement of Brush Assembly for Slip Ring
Removal
1. Removing connector from brush
assembly
Remove the connector from the brush assembly
board.
2. Removing the brush cover
Remove the two precision screws and remove the
brush cover in the direction of the arrow.
3. Removing the brush assembly
(1) Among the two screws that are fixing the
brush base, remove the screw that is shown as
1 by the illustration.
(2) Loosen the screw 2 and move the brush
base in the direction of the arrow.
(3) Remove the screw 2 and remove the brush
assembly.
7-32
Precision screws
P2 x 2
Brush cover
Connector of
Brush assembly
board
2
PSW2 x 5
Brush assembly
1
PSW2 x 5
Brush base
Slip ring
HDW-750/750CE V1