Sony HDW-750 Maintenance Manual page 177

LENS FILE 2 Display (Various adjustments-1 for LENS file)
O
? 07 LENS FILE 2
LENS M VMOD
LENS CENTER H
LENS CENTER V
OUTPUT SELECT
LENS R FLARE
LENS G FLARE
LENS B FLARE
LENS W-R OFST
LENS W-B OFST
Item
LENS M VMOD
LENS CENTER H
LENS CENTER V
OUTPUT SELECT
LENS R FLARE
LENS G FLARE
LENS B FLARE
LENS W-R OFST
LENS W-B OFST
*1 : RGB can be selected only when the Camcorder is used in the service mode.
HDW-750/750CE V1
: 0
: 0
: 0
: Y
: 0
: 0
: 0
This menu item is displayed when the lens extender is ON or 0.8.
: 0
: 0
This menu item is blanked when the lens extender is OFF.
Setting Function
(_99 to 99) Adjusts the master V. modulation correction value.
_480 to 479 Sets the center marker position. (Horizontal direction)
_270 to 269
Sets the center marker position. (Vertical direction)
*1
Y/R/G/B/RGB Selects the video signal that is output from the TEST OUT
and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when the REAR
BNC OUT SEL of the OUTPUT SEL display of the
OPERATION menu selects the VBS position and when
the TEST OUT SELECT chooses the SD position.) The
output signal returns to the Y-signal without fail at power-
on.
(_99 to 99) Adjusts the R flare compensation level.
(_99 to 99) Adjusts the G flare compensation level.
(_99 to 99) Adjusts the B flare compensation level.
(_99 to 99) Adjusts the R white gain offset value.
(_99 to 99) Adjusts the B white gain offset value.
4-7. FILE Menu
4-55