Removing And Reinstalling The Flexible Card Wires - Sony HDW-750 Maintenance Manual

1-8. Removing and Reinstalling the
Flexible Card Wires
This unit uses two types of flexible card wire.
m
. Life of flexible card wire will be significantly shortened if it
is folded. Be very careful not to fold the flexible card wire.
. When a flexible card wire is disconnected, check if it has
peeling-off or scratch on the tin plated contact of the
connector. If the copper plating of the base material
exposes due to wear of the tin plated contact of the
connector, replace it with the new flexible card wire.
Type-A
Removal
1. Open the connector latch in the direction of arrow A to
release the lock.
2. Remove the flexible card wire in the direction of arrow B.
B
A
Connector
Reinstallation
1. Hold the flexible card wire with its blue surface to the
front, and insert it in the direction of arrow A.
2. Close the connector latch in the direction of arrow B to
lock it.
A
B
Blue surface
Connector
HDW-750/750CE V1
Flexible card wire
Connector latch
Flexible card wire
Connector latch

1-8. Removing and Reinstalling the Flexible Card Wires

Type-B
Removal
1. Open the connector latch in the direction of arrow A to
release the lock.
2 Remove the flexible card wire in the direction of arrow B.
Connector latch
Connector
A
Reinstallation
1. Hold the flexible card wire with its blue surface to the
front, and insert it in the direction of arrow A.
2. Close the connector latch in the direction of arrow B to
lock it.
Connector latch
Connector
B
Blue surface
Flexible card wire
B
Flexible card wire
A
1-17