Sony HDW-750 Maintenance Manual page 312

7-7. Pinch Roller Assembly Replacement
Removal
1. Removing the pinch roller assembly
(1) Rotate the manual eject gear (A) counter-
clockwise and remove it until the pinch roller
assembly comes out of the rib of the cassette
stopper completely.
(2) Loosen the precision screw in the center of
pinch roller assembly. Remove the pinch
roller assembly by pulling it straight up.
n
When loosening the precision screw, do not
press it excessively with screwdriver. At the
same time, rotate the screwdriver while
holding the pinch roller assembly with hand.
(3) Remove the precision screw from pinch roller
assembly.
7-42
Manual eject
gear (A)
Rib of cassette
stopper
Precision screw
P1.4 x 3.5
Pinch roller assembly
Pinch roller assembly
mount shaft
(cleaning)
HDW-750/750CE V1