Mic In Connector Replacement - Sony HDW-750 Maintenance Manual

6-5. MIC IN Connector Replacement

6-5. MIC IN Connector
Replacement
1. Remove the three precision screws. While
removing the MIC connector box assembly
in the direction of A, disconnect the harness
from the connector (CN501) on the MA-103
board.
n
Depending on the times of production at the
factory, there are sets that use the different
shape of MA-103 board.
2. Remove the two precision screws and remove
the MA-103 board from the MIC connector
box in the direction of A.
3. Remove the soldering and remove the MIC
IN connector from the MA-103 board.
4. Install the new MIC IN connector by revers-
ing the steps of removal.
n
When installing the MIC connector box
assembly to the main unit, be careful not to
damage the harness.
6-10
CN501
MA-103 board
Precision
screw
P2.6 x 5
A
Precision
screws
MIC connector box assembly
P2.6 x 5
MA-103 board
A
MIC connector box
Precision screws
2.6 x 5
MIC IN connector
HDW-750/750CE V1