Sony HDW-750 Maintenance Manual page 526

11-3. Contents of Menus
1 1 1 1 To adjust all channels 1
1. Insert the alignment tape (HR5-1A : Part No. 8-960-076-01).
n
Be sure to use the specified alignment tape. If any tape other than
the specified alignment tape is used, the adjustment cannot be
performed correctly.
2. Select ALL and press the rotary encoder.
3. The adjustment starts from channel A.
If the alignment tape is not inserted, the message "INSERT HR5-
1A" appears and the cassette lid opens. When the alignment tape
is inserted, "WAITING ..." appears and then the adjustment starts.
n
If the message "WAITING ..." keeps appearing even though the
automatic adjustment is started, the un-recorded segment might
have been played back. In such a case, change the playback
position of the alignment tape.
4. The adjustment results of all channels are displayed.
When STOP is pressed, data as of this timing is displayed.
When the adjustment ends normally :
OK is displayed in all channels and in the ALL
column.
RF ADJUST MENU
A11:EQUALIZER
AUTO ADJUST COMPLETE
RETURN TO A1F TO SAVE
CH RSLT
A OK
C OK
E OK
G OK
ALL OK
2 2
2 2 2 To adjust the desired channel only
1. Insert the alignment tape (HR5-1A : Part No. 8-960-076-01).
2. Select the channel to adjust and press the rotary encoder.
3. Result of adjustment appears for the selected channel only. (OK/
NG is not displayed in the ALL column.)
When STOP is pressed, data as of this timing is displayed.
When the adjustment ends normally : OK is displayed.
When the adjustment fails :
11-24
CH RSLT
B OK
D OK
F OK
H OK
NG is displayed.
RF ADJUST MENU
A11:EQUALIZER
NOW ADJUSTING...
CH RSLT
A OK
C OK
E
G
ALL
When the adjustment fails :
NG is displayed in the channel in which an error
occurs and in the ALL ccolumn.
RF ADJUST MENU
A11:EQUALIZER
INCOMPLETE
CH RSLT CH
A OK B
C OK D
E OK F
G OK H
ALL NG
n
When the message "INCOMPLETE" is displayed in
both cases of 1 and 2, refer to the item "If the
message "INCOMPLETE" is displayed" in Section
11-3-4.
CH RSLT
B OK
D OK
F
H
RSLT
NG
OK
OK
OK
HDW-750/750CE V1