6-18. PS-595 Board Replacement
6-18. PS-595 Board Replacement
1. Remove the outside panel assembly.
(Refer to Section 1-4.)
2. Remove the CCM-45 board.
(Refer to Section 6-17.)
3. Remove the two precision screws. While
removing the PS-595 board, disconnect the
harness from the connector (CN101, CN102).
4. Install the new PS-595 board by reversing the
steps of removal.
6-30
PS-595 board
Precision
screws
P2 x 4
CN102
CN101
HDW-750/750CE V1