Manual Eject Assembly Replacement - Sony HDW-750 Maintenance Manual

7-20. Manual Eject Assembly Replacement

7-20. Manual Eject Assembly Replacement
Overview
Replacement
Removing the manual eject assembly
Installing the manual eject assembly
Operation check
Preparations
1. Check that the unit is in the unthreading-end state.
2. Turn off the main power.
3. Remove the front lid and outside panel assembly. (Refer to Section 1-4.)
n
Manual eject assembly can be replaced when the cassette compartment attaches to
the unit.
Tools
. Torque screwdriver bit (for M1.4) : J-6325-110-A
. Torque screwdriver (for 3 kg) :
Removal
1. Removing the manual eject assembly
Remove the precision screw and manual eject
assembly in the direction of the arrow.
n
The mount shaft contains the compression (coil)
(ST) spring inside. Be careful not to lose it.
7-70
J-6325-400-A
Compression (coil)
(ST) spring
Manual eject
assembly
Precision screw
P1.4 x 3.5
HDW-750/750CE V1