Maintenance Menu - Sony HDW-750 Maintenance Manual

4-6. MAINTENANCE Menu

n
When the range of setting is surrounded by parenthesis ( ) in the setting column, the setup value is the
relative value. The range of setting in parenthesis ( ) can be different from what shown in the manual
depending on the setting in the layer lower than this menu.
WHT SHADING Display (Adjusting white shading)
? 01 O WHT SHADING
SHADING CH SEL
OUTPUT SELECT
R WHITE H SAW
R WHITE H PARA EX:
R WHITE V SAW
R WHITE V PARA EX:
WHITE SAW/PARA
Item
SHADING CH SEL
OUTPUT SELECT
R/G/B WHITE H SAW
R/G/B WHITE H PARA
R/G/B WHITE V SAW
R/G/B WHITE V PARA
WHITE SAW/PARA
*1 : TEST is displayed only when the unit of which the ROM version of the AT board is 1.40 and higher. You can check the AT version by
the ROM VERSION display in the DIAGNOSIS menu.
*2 : RGB can be selected only when the Camcorder is used in the service mode.
n
In the R/G/B WHITE H SAW/PARA and R/G/B WHITE V SAW/PARA, the lens extender position is
displayed in the rightmost-end of the menu items.
Blank : OFF
EX : ON
08 : 0.8
HDW-750/750CE V1
: R
: Y
EX: 0
0
EX: 0
0
: ON
Setting Function
*1
R/G/B/TEST Selects the channel of shading correction.
Y/R/G/B/RGB *2 Selects the video signal that is output from the TEST OUT
and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when the REAR BNC
OUT SEL of the OUTPUT SEL display (of the OPERATION
menu) selects the VBS position and when the TEST OUT
SELECT chooses the SD position.) The output signal returns
to the Y-signal without fail at power-on.
(_99 to 99) Adjusts the H.SAW correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
(_99 to 99) Adjusts the H.PARA correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
(_99 to 99) Adjusts the V.SAW correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
(_99 to 99) Adjusts the V.PARA correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
OFF/ON Turns ON/OFF all of the white shading menu items of R/G/B,
H/V and SAW/PARA corrections.
4-6. MAINTENANCE Menu
4-35