Power Switch Replacement - Sony HDW-750 Maintenance Manual

6-14. POWER Switch Replacement

6-14. POWER Switch Replacement
1. Remove the outside panel assembly.
(Refer to Section 1-4.)
2. Open the inside panel assembly.
(Refer to Section 1-5.)
3. Remove the front assembly.
(Refer to Section 6-1-1.)
4. Disconnect the harness from the connector
(CN504) on the IFA-11 board.
5. Remove the nut and remove the POWER
switch.
6. Install the new POWER switch by reversing
the steps of removal.
n
When the POWER switch is installed,
direction of the POWER switch must be set
as shown in the illustration.
6-26
IFA-11 board
POWER switch
Top view
RED
GRAY
To the front panel
CN504
Nut
POWER switch
HDW-750/750CE V1