V. Detail Black Clip Adjustment - Sony HDW-750 Maintenance Manual

9-24. V. Detail Black Clip Adjustment

9-24. V. Detail Black Clip Adjustment
Note
Perform this adjustment as needed by the customer.
Preparation
. OUTPUT/DCC switch (inside panel) → CAM/ON
. Shoot the gray scale chart to fill the entire screen of the
under-scanned picture frame.
Equipment : HD digital waveform monitor
Measurement point : HD SDI connector (rear panel)
Adjustment point : 1 lens iris
Specifications : Open the lens iris by 1 F-stop
from the reference iris position
(A = 700 ± 14 mV).
. Select a horizontal scanning line in the bottom of the
white area in the center of the waveform monitor using
the LINE SELECT function.
Adjustment Procedure
Equipment : HD digital waveform monitor
Measurement point : HD SDI connector (rear panel)
1. Complete the adjustment as shown below by using the
setup menu.
MENU : PAINT
PAGE : 08*DETAIL2
ITEM : DETAIL V-BLK LIMIT
(Default setting when shipped from
the factory: 0)
Specifications : Adjust the amplitude of the B portion
for the customer's preference.
9-24
B
HDW-750/750CE V1