Cue/Tc Head Azimuth Adjustment - Sony HDW-750 Maintenance Manual

8-2. Tape Run System Adjustment
Adjustment Procedure
3. CUE/TC head height adjustment
. If the level increases when you push down the tape :
Rotate the height adjustment nut in counter-
clockwise until the maximum output waveform
is obtained.
. If the level increases when you push up the tape :
Rotate the height adjustment nut in clockwise
until the maximum output waveform is ob-
tained.

4. CUE/TC head azimuth adjustment

(Refer to Section 8-2-6.)
5. CUE/TC head tape-to-head contact
check
(Refer to Section 8-2-7.)
6. CUE/TC head position adjustment
(Refer to Section 8-2-8.)
7. CUE/TC head height check
Recheck it following step 2.
8-38
HDW-750/750CE V1