Outside Panel Assembly - Sony PXW-X500 Service Manual

2-2.

Outside Panel Assembly

Procedure
1. Draw the outside panel assembly.
1) Open the cover (NO DONGLE) and the BNC cap.
2) Loosen the five screws (with drop-safe) of the outside panel assembly, and draw the outside panel assembly.
Cover (NO DONGLE)
Screws
(with drop-safe)
BNC cap
Outside panel assembly
2. Disconnect the fine-wire coaxial cable from the connector (CN001) on the CN-3722 board, and then remove the
outside panel assembly.
CN-3722 board
Fine-wire coaxial cable
3. Install the removed parts by reversing the steps of removal.
PXW-X500
CN001
Outside panel assembly
Screws
(with drop-safe)
Fine-wire coaxial cable
2-3