Cue/Tc Head Height Adjustment - Sony HDW-750 Maintenance Manual

8-2. Tape Run System Adjustment

8-2-5. CUE/TC Head Height Adjustment

Notes
. The CUE head height adjustment is closely related to the azimuth adjustment,
tape-to-head adjustment and position adjustment.
. When the CUE head height adjustment is performed, be sure to perform the
related other adjustments (or checks).
Tools
. Alignment tape HR2-1A : 8-960-076-11
. HN-255 assembly :
. Nut driver
. Oscilloscope
Preparations
1. Turn off the main power.
2. Remove the shoulder pad and the plate.
3. Connect the HN-255 assembly to the MDC-
13 board.
5-pin connector on the HN-255 assembly :
CN902/MDC-13 board
8-pin connector on the HN-255 assembly :
CN903/MDC-13 board
4. Connect an oscilloscope.
CH-1 : PB CUE/Circuit board on the HN-255
assembly
5. Turn on the main power.
6. Insert the alignment tape HR2-1A.
8-36
A-8315-553-A
P2 x 4
Screws
(with drop-safe)
Shoulder pad
Plate
HDW-750/750CE V1