Media Feed Motor Not Operating, Sensor Works; Media Feed And Take-Up Motors Not Operating, Both Sensors Working - ENCAD NovaJet Pro 600e Service Manual

NovaJet PRO 600e Service Manual
Media Feed
Motor Not
Operating,
Sensor Works
Media Feed
and Take-Up
Motors Not
Operating,
Both Sensors
Working
4-12 Troubleshooting
Table 4-1. Troubleshooting Table (cont).
Symptoms Possible cause
• bad connection
to the motor
• bad Feed motor
• faulty wiring leg
harness
• bad MPCB
• printer is in
Sheet Mode
Solution
reconnect Feed
motor
Replace Feed
motor
reseat or replace
leg harness
replace MPCB
put in Take-Up
Mode (to activate
both) or Roll Mode
(to activate feed
motor only),
(under "Supply
Type" from
"Paper Option
Menu")