ENCAD NovaJet Pro 600e Service Manual page 63

NovaJet PRO 600e Service Manual
3. Place the test cartridge upright on a flat surface and 'zero' the
4. Remove the Cyan ink cartridge. Snap the test cartridge with
3-22 Maintenance
gauge by loosening the knob near the top and turning the dial
until the needle is at the '0' position on the dial. Tighten the
knob. See Figure 3-16.
Figure 3-16. Zeroing the Micrometer Gauge.
the micrometer gauge into the position vacated by the Cyan ink
cartridge. See Figure 3-17. Ensure that the micrometer can be
read from the BACK of the printer.
Figure 3-17. Test Cartridge Installed.