ENCAD NovaJet Pro 600e Service Manual page 130

Figure 5-16. Paper and Encoder Sensor Removal.
2. To remove the Paper Sensor:
a. Unlock the connector at J3 and remove the flex cable.
b. Turn the Carriage Assembly over and hold it while firmly
grasping the Paper Sensor between thumb and index finger. See
Figure 5-16.
c. Pull straight up on the Paper Sensor and remove it from the
Carriage Assembly.
3. To remove the Encoder Sensor:
a. Unlock the connector at J2 and remove the flex cable.
b. Turn the Carriage Assembly over and lay it with the top side
facing down.
NovaJet PRO 600e Service Manual
Assembly\Disassembly 5-31