ENCAD NovaJet Pro 600e Service Manual page 41

NovaJet PRO 600e Service Manual
A fan assembly is attached to the lower part of the printer legs that is
used to speed up the drying time of the ink that is deposited onto the
media. This is to ensure that the ink is completely dry before the media
is rolled onto the take-up reel. The 42 inch model has five drying fans,
while the 60 inch version has seven.
The drying fan assembly has been designed to keep power consump-
tion down to a minimum by only activating the amount of fans that
are required to dry the size of media that is loaded on the printer.
The drying assembly can also be disabled through the printers firmware
via the keypad.
2-18 Theory of Operation