ENCAD NovaJet Pro 600e Service Manual page 121

NovaJet PRO 600e Service Manual
5. Disconnect the last link of the Ink delivery System from the rest of
the link assembly by pressing in on the two small posts from the
next to last link that are located in the holes of the last link. See
Figure 5-11. Releasing one post at a time may be easier to
accomplish than trying both at once.
6. Disconnect the Ink Delivery System Bracket from the Left Sideplate
using a #2 Phillips screwdriver.
7. Carefully slide the Ink Delivery System out of the printer.
5-22 Assembly\Disassembly
Figure 5-11. Disconnect Ink Delivery System Link.
The last link of the Ink Delivery System linkage is a spe-
cial link and is to remain as part of the Left Sideplate
Assembly. It is mounted to the Sideplate Assembly and
will not be delivered as part of the Ink Delivery System.
NOTE