ENCAD NovaJet Pro 600e Service Manual page 144

9. Using a #1 Phillips screwdriver, remove the black flat-head
screws from the top of the Platen that holds the left and right
Drive Shaft Supports in place.
It may be necessary to loosen (do not remove) the screws
that secure the Y-Arm Assembly to the Platen so that
the Lower Drive Roller Assembly clears the ends of the
screws that protrude inside of the Platen when remov-
ing the Lower Drive Roller Assembly.
It may be necessary to loosen (do not remove) the screws
that secure the left Leg Assembly to the Platen so that
the Lower Drive Roller Assembly clears the ends of the
screws that protrude inside of the Platen when remov-
ing the Lower Drive Roller Assembly.
The Fan Assemblies will be removed at the same time
that the Lower Drive Roller Assembly is removed. Ex-
ercise extreme care that the fan assemblies do not drop
out of the Platen when removing the Lower Drive Roller
Assembly.
10. Carefully slide the Lower Drive Roller Assembly (and the Fan
Assemblies) out of the left side of the Platen.
NovaJet PRO 600e Service Manual
Assembly\Disassembly 5-45