ENCAD NovaJet Pro 600e Service Manual page 106

Figure 5-3. Keypad and Display Installation/Removal.
2. Turn the Right Cover Assembly over and disconnect the Display
power cable located at J13 from the Display Power Converter.
With a 1/4" socket or wrench, remove the four kepnuts securing
the Display Power Converter. See Figure 5-3. Remove the Display
Power Converter.
3. With a 1/4" socket or wrench, remove the four standoffs that
secures the LCD Display Assembly to the Keypad. Remove the
Display Assembly.
4. Disconnect the grounding flex cable from the large standoff before
removing the Keypad Assembly. See Figure 5-4 for location.
Remove the Keypad Assembly.
NovaJet PRO 600e Service Manual
Assembly\Disassembly 5-7